Company News Company Exhibition

Cause of direction jitter

27 Feb 2018

1, the jitter of highway cruising: suspension problem

Chassis deformation and displacement is an important cause of steering wheel vibration, once the steering wheel severe jitter, general maintenance technician will check whether the vehicle chassis has obvious deformation, then four wheel positioning check, if there is a need to adjust the angle of toe angle, on the chassis.

2, potholes jitter: hanging connection problems

If your car is driving on flat road when the fault is not obvious, but after the potholes will shake seriously, it's probably hanging transverse pull rod ball head Songkuang, ball head rubber sleeve off the improper connection problems.

3, low speed in the direction of virtual, body sloshing serious: tire problem

This situation is mostly due to abnormal tire wear, which causes suspension angle deviation due to rubbing, bumping or aging during daily use, which may cause abnormal tire wear, resulting in car body shaking and direction deviation.

4. The resonance of the vehicle during the driving process: the transmission shaft problem

Most of this situation is caused by the deformation and distortion of the transmission shaft or the loose joint of the universal joint of the transmission shaft. The drive shaft will not be checked at all in daily maintenance, so it is likely to be undetected if it has a problem.

5, steering wheel jitter when brake: brake disc problem

In this case, it is likely that the car brake disc and the brake pad appear on the surface. In general, it is necessary to wear the brake disc or the brake disc.


More news

Car Jack Stands

27 Feb 2018

Floor Jack

27 Feb 2018

Cross Wrench

27 Feb 2018